How to Install a Ghost Immobiliser
A ghost immobiliser is a hidden security system that protects your car from hacking and key cloning. It stops the engine from running until a PIN number is entered. This can be as long as 20 characters.
This additional layer of security is not visible to thieves who might not expect it. Certain systems come with an app which allows the owner to deactivate their immobiliser if they forget their PIN number or use service/valet mode.
Connecting the vehicle's CAN Bus
The Ghost 2 Immobiliser is a cutting-edge security system that is able to be integrated into your vehicle's ECU and provides a discrete line of defence against thieves. It is extremely efficient and user-friendly. This makes it a valuable addition to your vehicle's arsenal of security. However, like any anti-theft device, it's not foolproof and requires regular maintenance to ensure optimal operation. This guide will help you make the most of your Ghost 2 immobiliser.
CAN (Controller Area Network) is a reliable serial network that lets microcontrollers communicate with each other in short distances, without the need for central control units. It is designed to multiplex electrical wiring in vehicles, saving on copper. It has many advantages, such as low cost and simple use.
In most modern cars, the CAN protocol is used to communicate with various systems, including the engine management system (EMS), transmission controller, steering module as well as air conditioning controls and more. It also carries sensor data like speed sensors and inputs, to control various features of the vehicle. The CAN bus can be used to monitor the condition of these different components and can prevent the vehicle from starting if it's in an unsafe condition.
It's crucial to understand how the CAN bus functions and how it's secured. It is possible to add additional features to a vehicle by using CAN bus, however it's crucial to safeguard it from hackers and other threats. The best method to achieve this is to install a firewall and monitoring your CAN bus through software.
Ghost2's discreet control unit is concealed inside the car's wiring harness or dashboard, eliminating the possibility of a criminal physically altering it. It is also impossible to reset a PIN or emergency code without access to the car.
If you have to give your car away to a valet parking service, maintenance, or any other reason, you can use the Transport Mode. how much is a ghost immobiliser will disable the Ghost immobiliser's keyfob and ignition functions, and will only come back on when the car reaches 31 mph for a period of 15 minutes.
Making PIN codes
The Ghost immobiliser shields your vehicle from theft. The cutting-edge technology uses a PIN code to shut down the engine and prevent it from starting if you do not have the proper code or an authorized fob/mobile device. The system's discrete design makes it unnoticeable, and offers unrivaled security against theft. The system is TASSA-certified and could save you substantial sums on your car insurance.
During the installation, the Ghost system goes into the learning mode to record the sequence of buttons pressed to create your unique pin code. Once the pin code is created the installer will guide you through the steps to activate the system. Once activated, the Ghost system shuts down your vehicle's starting motor unless you enter a valid pin or switch the vehicle to transport mode. This makes it extremely difficult for thieves to copy or hack your vehicle's starting system.
Installing a Ghost immobiliser is easy but it is crucial to follow the detailed instructions in the user's manual to ensure that it operates properly. Multimeters and basic hand tools are a good way to check electrical values. Insulation tape, heat shrink tubing, and cable ties are a good option to shield wires from damage. Check the system on a regularly basis to detect any issues that could be.
After the installation is completed it is crucial to conduct a final test of the system prior to turning on the ignition in your vehicle. Ghost immobilisers will re-arm themselves after a period of 3 to 30 seconds depending on the model of your vehicle. The system is also equipped with a Service/Valet Mode that allows you to temporarily remove the system for servicing or valet parking.
The immobiliser can be hidden beneath the dashboard or the steering wheel. It is recommended to use a small piece of paint or duct tape to mark the CAN H and CAN L wires to ensure that you easily find the wires during testing. The CAN H and L wires must also be connected to an electrical source that delivers a constant 12V. It is also important to check the connections following testing, as misidentifying these wires can cause the system to malfunction.
Invoking the system
A ghost immobiliser stops your car from starting until you press a number of buttons on the vehicle, usually on the steering wheel or door panel, or the central console. The sequence is determined by the user and can be changed at any time. Once activated, the system will not be removed. This is a fantastic option for anyone who wants to secure their vehicle from theft.
The system is designed to be undetectable. This means it can't be detected by modern diagnostic tools or code-grabbing technology. It also doesn't send out radio frequencies which makes it difficult for thieves to find the device.
If the device is found it will stop the engine from starting. It will also sound an alarm to scare the thief away. The device can be used to monitor the location of a vehicle and assist in the recovery of the vehicle in the event that it is stolen.
If you're interested in a ghost immobiliser call the experts at Car Specalist Customs to get an estimate and discuss your options. We are certified to install ghost immobilisers for your vehicle. We will make sure that it is concealed in a place that is difficult to reach. We can also provide additional security measures, such as the wheel lock and kill switch to keep your car safe from thieves.
Disarming the System
It is essential to know how to deactivate a Ghost immobiliser if installed in your vehicle. This will help you in the case that you lock your keys in the car or if your battery fails. The system uses an unique PIN code that only you know. It cannot start the car without this code. Pressing a combination buttons on the steering wheel or on the dashboard is the easiest method to enter your code. This is a much easier method than using the key fob and it also prevents anyone from copying your remote.
click homepage to other aftermarket immobilisers which require cutting wires to install, Ghost2 is non-invasive and integrates with your vehicle's CAN bus network to operate. Its most prominent characteristic is that it disables the engine, without affecting normal vehicle functions. This makes it difficult for thieves to use signal boosters or duplicate keys to car keys. Additionally, it doesn't emit radio frequencies, which means thieves won't be able to detect it.
The Ghost system also features the Transport Mode that allows you to temporarily disable the security system in situations such as transportation or servicing. This feature is ideal if you are lending your vehicle to someone else without sharing your PIN code or if your vehicle needs to be secured when you drive it. Press the button five times within two seconds to enable Transport Mode. The Ghost system will confirm activation by 5 indication signals.
After you're done, make sure to save the emergency code in a safe location outside of your vehicle. If you ever get locked out of your car, you can call the company or technician who installed the system, and they will give you the code. If you are unable to reach them then you can try contacting an authorized dealer, but this will involve verification procedures and could result in additional fees.
This system is not just practical, but it can also safeguard your vehicle from theft and reduce the cost of insurance. Many insurance companies offer reduced monthly premiums, or even financial incentives to install this anti-theft system.